REFRACTORIES AND COATINGS

Check out some of our most popular items; we carry many more types, too numerous to list!

C-W 55 HS PLASTIC - Phos-bonded plastic designed to give excellent strengths. 58% Alumina.
LADLE RAM - 60% Alumina ramming mix used primarily for lining of iron and steel ladles.
ARMOR KOTE - Fine Grained Graphitic veneering Mix for coating ladles, helps in the removal of slag build-up.
C-W 620 SEAL - A fine grained Phos-Bonded Veneering refractory 60% Alumina for use as a patch or lining material in molten metal handling equipment.
C-W 610 SEAL - Veneering refractory, 85% Alumina manufactured on the fine and wet consistent to be applied with a rubber glove or trowel to patch worn linings, spouts and other high wear areas.
90 RAM TR - 90% Alumina material for troweling and patching applications. Very durable high strength material, works well patching ceramic shell and investment molds also!
90 RAM PC - Same and the TR but a stiffer putty consistency, works excellently for thin lining applications.
CASTABLE 32 - High Alumina, Low Iron castable that can be cast or gunned. It has excellent spalling and abrasion resistance as well as high strengths and volume stability.

CORE AND MOLD COATINGS

MOLDLITE 546PM - Olivine Graphite wash reduced in an alcohol premix. Excellent suspension and works well as a chill coating.
DU MEIGHT AB10 AP80 - Excellent for copper based alloys. A blend of Zircon, Mica, and Graphite manufactured as a premix reduced with isopropyl alcohol.
LEECOLITE AZN3-06G - High solids Zircon coating designed for the production of heavy sectioned gray iron, ductile iron, carbon steel, and stainless steel castings.
DURATHERM 5 - Zircon coating designed for the most severe and demanding situations in the production of steel castings. This can be reduced with either water or isopropyl alcohol.